SOLARTRON DIGITAL PROBES FOR SALE

MAYA is now offering Solartron Digital Probes & other commonly purchased components for sale through a digital marketplace. If you need a quick turnaround probe and want to avoid the 6-8 week lead time, we’ve made it convenient!

We are consistent in our pursuit of the highest quality devices to support your measurement needs. For this reason, we choose the fastest, most reliable probe on the market: Solartron. Should you need a quick replacement on our most frequently used probes, please click on the links below to be redirected to our online digital marketplace.

Orbit 3 T Connector

The Orbit Network ‘Building Block’
Each Orbit 3 Digital Probe and Interface Module must have it’s own T Con

PSIM – Power Supply Interface Module

For use with multi-channel systems needing more power than available from the host computer. The power supply can also extend the network beyond the normal 10m per port limit depending on cable type.
Required for use with all Orbit 3 Digital Probes and Controllers

Orbit 3 USBIM MK2

The new Orbit 3 USBIM MK2 provides a controller for all applications from Virtual Com to Ultra High Speed Dynamic capability all without the need to open the PC to insert a card.
When combined with the new Orbit3 .NET Orbit Support pack for Windows the new USBIM is capable of high speed readings up to 3500 per second. It fully supports the original dynamic modes of 4000 rdg/sec – 8 modules, 2000 rdg/ sec – 16 modules or 1000 rdgs/sec- 31 modules, but can also be used in Dynamic 2 to provide 2000 rdgs/sec – 30 modules, 1000 rdgs/sec – 60 modules up to 400 rdgs/sec for a maximum of 150 modules.

DP/2/S – Spring Push Probe

Solartron DP/2/S: The standard DP range of Spring Push Probes has justifiably become the work horse of the gauging industry. Very high resolution, excellent linearity and high data speed come as standard. Long life precision bearings, and an IP65 rating ensure that probes maintain their performance for millions of cycles.

DZ/2/S – Compact Spring Push Probe

The DZs are probably the shortest probes available on the market with a full 1mm or 2mm calibrated travel. A bearing size normally found in much longer bodies ensures a long life. The small size, coupled with enhanced linearity and resolution, makes them ideal where space is a problem.

DP/2/P – Pneumatic Push Probe

The standard range of Pneumatic Probes comes with an IP65 rating to ensure a long working life in wet or oily environments. In order to ensure the probe is totally sealed to IP65, actuation is achieved by pressurising the gaiter.

DP/1/S – Spring Push Probe

The standard DP range of Spring Push Probes has justifiably become the work horse of the gauging industry. Very high resolution, excellent linearity and high data speed come as standard. Long life precision bearings, and an IP65 rating ensure that probes maintain their performance for millions of cycles.

DZR/1/S – Compact Spring Push Probe

The DZs are probably the shortest probes available on the market with a full 1mm or 2mm calibrated travel. A bearing size normally found in much longer bodies ensures a long life. The small size, coupled with enhanced linearity and resolution, makes them ideal where space is a problem.

DJ/5/P – Pneumatic Jet Push Probe

‘J’ type probes are similar to standard pneumatic probes except that actuation is by an inbuilt piston. High tip forces are available but as air is vented through a port close to the front on the probe, they have a lower IP rating.
Jet Probes are not “Gaiter Dependent” which means you should never need to replace the Jet Gaiters. They don’t “Fly Off”

DP/5/P – Pneumatic Push Probe

The standard range of Pneumatic Probes comes with an IP65 rating to ensure a long working life in wet or oily environments. In order to ensure the probe is totally sealed to IP65, actuation is achieved by pressurising the gaiter.

DPR/1/S – Spring Push Probe Right Angle 1mm Range

This is a non-standard item, be sure to check inventory for availability!

DPR/2/S – Spring Push Probe Right Angle 2mm Range

This is a non-standard item, be sure to check inventory for availability!

DM/0.5/S – Mini Probe

DM – Bore Gauge probe with small in line connector (not the 3 pin type) and 12.7mm radius T/C tip

DM/0.5/S – Mini Probe

DM/0.5/S, T/C Tip, connection leads 18″ from probe

DM/1/S – Mini Probe

DM – Bore Gauge probe with small in line connector (not the 3 pin type) and 12.7mm radius T/C tip